.

Platforms are the best of our anti-vibration accessories, they damp vibrations more efficiently than the Isolation Feet themselves. We offer platforms in three sizes: small 35×35 cm, medium 45×40 cm and large 55x45cm; on request any size is available. The standard colour of the platform is graphite, on request we can make them in any colour, eg only dark-graphite. Platforms have brass plates with the logo on the front and back or only back (your choice).

Platforms are made of 2 or 3 kinds of anti-vibration material and are equipped with ball feet or magnetic feet. No.1 has magnetic feet underneath and on top. No.2  has magnetic feet underneath and ball feet on top. No.3 has two sets of ball feet. No.4 have only one set of ball feet, underneath. The body of Platform No. 3 consists of two types of material (hard and soft), bodies of Platform No. 1, 2 and 3 are made of three types (hard, medium and soft) .

P1-1sThe body of Platform Number One consists of 5 layers made of 3 types of anti-vibration materials. The two outer layers are made of medium hardness wood. In the middle is a layer of our hard anti-vibration material, separated from the rest by two layers of soft anti-vibration material. 

Two sets of magnetic feet have 2x 4 anti-vibration layers, so Platform No. 1 has 13 anti-vibration layers, alternating with hard and soft material (including magnetic air pillow).

 The thickness of the body is 8.4 cm, the height of the set is 19.4 cm. The body weight is 7.1 kg (small), 10.8 (medium) or 14.3 kg (large). In addition, there is a mass of feet: 2.4 kg (small), 3.2 (medium) or 3.8 kg (large).

P1-2s  .The magnetic feet are raising the equipment on an air pillow (magnetic levitation); to work, should be properly weighted (must bend, but not settle). The small platform has smaller feet, with weaker magnets, medium and large platform – bigger feet, with stronger magnets Underneath medium platform has 4 feet, large – 5 feet). Depending on the weight of the equipment, we use 3, 4 or 5 feet.  Too light equipment should be ballasted from above with Receptor Weight or lead weights. Under the equipment we put the feet in such places so that they balance uneven distribution of weight of the unit, then move stands until they will be bent equally.